Wednesday, 13 November 2019

Single Plank Engineered Wood Flooring Always Comes Out On Top

You're here because you are in the process of picking a new wood flooring. You've (more or less) decided that engineered wood flooring is going to be the best option for your project. And today you are in the point of making the selection between unmarried and multi-plank.

Single plank versus multi plank hardwood floors is a question that lots of people face when buying wood floors. When speed is of the essence, the idea of having the ability to place 2 or 3 planks set up at the exact same time instead of 1 is really appealing and tempting. However, if this is where you're at right now, we would encourage you to think again. Why? Let us explain...

What's single plank engineered wood flooring?

Single plank engineered timber flooring as its name implies is wood flooring that comes with only 1 plank visible on every board.

When engineered wood floors is assembled , it starts off with a good core board that is constructed of layers and layers of ply which are secured together. Once the center board was made it's topped off with a layer of solid wood. It is this layer of solid wood that makes engineered timber seem so convincingly like solid wood flooring, yet boast all the benefits of engineered.

Single plank engineered timber flooring has just 1 bit of solid wood in addition to It does not have two pieces butted together on every plank, neither does it have grooves cut in the piece so that it appears like it's two or three bits sitting side by side on exactly the same board. This is what single plank engineered timber flooring is.

What's 3 or 2 plank engineered timber flooring?

Multi plank engineered timber flooring is often as broad as 45 or 60cm and is assembled with a strong multi-ply bonded board in its core. What's different about this alternative is that it's a top layer that has been created to seem as though it's two or three distinct pieces of wood onto it. It can well be two or three unique pieces of timber which were fixed firmly to the center board or it may be just one piece of timber with grooves cut inside. What you effectively wind up with is just one wide board that appears as though it is two or three boards.

Surely this should mean that you get the job done a great deal quicker and you've got a considerably reduced variety of joins on your flooring? On the face of it that appears to be a sensible debate, but let us have a good look at why single plank engineered timber flooring consistently comes out on top...

Why single plank engineered wood flooring Consistently comes out on top

In order to understand why single plank engineered wood flooring is obviously the winner, then we will need to take a step back.

Any regular reader of this blog will now know that wood, in all its forms contracts and expands in regards in contact with varying temperatures and moisture levels. While engineered wood expands and contracts significantly less than solid wood, it still experiences some small movement when conditions change.

When wood floors expands and contracts, then the planks push against one another and then reunite. When this occurs ever so slightly and not too often, it doesn't cause an issue. Nevertheless, when it occurs excessively you can get gaps on your flooring.

That's why single plank engineered timber flooring always comes out on top.

If you would like assistance to make Certain That You create the very best choices for your wood flooring project, why not get in touch so that you can benefit from the decades of experience we have in the group at Floor Sanding Wickford ? It costs nothing to chat, and we'll help you make sure that you make the best possible choices.

Wednesday, 1 March 2017

Floor Sanding Wickford


PINE: Pine is a softwood which grows in most areas of the Northern Hemisphere. There are more than 100 species worldwide.

Properties: Pine is a soft, white or pale yellow wood which is light weight, straight grained and lacks figure.It resists shrinking and swelling. Knotty pine is often used for decorative effect.
Uses: Pine is often used for country or provincial furniture. Pickled, whitened, painted and oil finishes are often used on this wood.

ASH: There are 16 species of ash which grow in the eastern United States. Of these, the white ash is the largest and most commercially important.

Properties: Ash is a hard, heavy, ring porous hardwood. It has a prominent grain that resembles oak, and a white to light brown colour. Ash can be differentiated from hickory (pecan) which it also resembles, by white dots in the darker summer wood which can be seen with the naked eye. Ash burls have a twisted, interwoven figure.
Uses: Ash is widely used for structural frames and steam bent furniture pieces. It is often less expensive than comparable hardwoods.

HICKORY: There are 15 species of hickory in the eastern United States, eight of which are commercially important.

Properties: Hickory is one of the heaviest and hardest woods available. Pecan is a species of hickory sometimes used in furniture. It has a close grain without much figure.
Uses: Wood from the hickory is used for structural parts, especially where strength and thinness are required. Decorative hickory veneers are also commonly used.

Thursday, 16 June 2016


Walnut is one of the most versatile and popular cabinet making woods. It grows in Europe, America and Asia.There are many different varieties.
Walnut is strong, hard and durable, without being excessively heavy. It has excellent woodworking
qualities, and takes finishes well. The wood is light to dark chocolate brown in color with a straight grain in the trunk. Wavy grain is present toward the roots, and walnut stumps are often dug out and used as a source of highly figured veneer. Large burls are common. Walnut solids and veneers show a wide range of figures, including strips, burls, mottles, crotches, curls and butts. European walnut is lighter in color and slightly finer in texture than American black walnut, but otherwise comparable.
Walnut is used in all types of fine cabinet work, especially 1 8th century reproductions.

Tuesday, 26 April 2016


1. Quebracho - From the Spanish “quebrar hacha,” which literally means
“axe breaker.” Aptly named, wood in the Schinopsis genus is among the
heaviest and hardest in the world.
2. Lignum Vitae -Widely accepted as the hardest wood in the world–this
wood has been listed as an endangered species and is listed in CITES.
 Consider Verawood as a very close substitute.
3. Gidgee - This Australian endemic is both very heavy and very strong.
 Some pieces are dark enough to be used as an ebony substitute: one that’s
even harder than the original article.
4. Snakewood - It’s easy to see what makes Snakewood so unique–its patterns
and markings resemble the skin of a snake. Limited supply and high demand
make this one of the most expensive woods on eart.
5. Verawood - Sometimes called Argentine Lignum Vitae, this wood is a gem:
inexpensive, great olive-green color, beautiful feathery grain pattern, and
it takes a great natural polish on the lathe.
6. Camelthorn - Formerly classified as a member of the Acacia genus, this
south African hardwood is a tough customer. The wood is stubbornly hard,
and the tree is protected by giant sharp thorns.
7. African Blackwood - In some parts of the world, this wood has achieved
an almost legendary status. Historical evidence points to this wood
(rather than Diospyros spp.) being the original “ebony.”
8. Black Ironwood - Pieces are very seldom seen for sale, as this tree is
too small to produce commercially viable lumber. Like the unrelated
Desert Ironwood, Black Ironwood is an excellent choice for small
turning projects.
9. Katalox / Wamara - Some pieces can be just about a dark as true ebony,
 while others are a more reddish brown with black streaks. So much depth
in the Swartzia genus, there’s something for everyone!
10. Cebil- Also known as Curupay or by the exaggerated name Patagonian
Rosewood, Cebil is not a true rosewood. It has a highly variable streaked
appearance not too unlike Goncalo Alves.